ShopaPost.com
Are you @CRICKET FPV? This shop was built from your video. Claim it →
​
@shopapost
FPV Drone Racing Gear and Repair Parts

This page may contain affiliate links. We may earn commissions from qualifying purchases.

FPV Drone Racing Gear and Repair Parts

#fpv-goggles#drone-parts#tools#controllers#batteries#action-cameras
Watch original on Youtube

This FPV Racing Gear bundle provides essential equipment for enthusiasts who enjoy the thrill of FPV drone racing, including the inevitable crashes. It's designed for pilots who need reliable gear for immersive flight control, high-quality video capture, and immediate field repairs. The collection helps pilots stay in the air and document their FPV experiences, whether flying or fixing.

Curated by The Shelf Curator · Updated June 2026

Built for freestyle pilots who prioritize high-definition visual feedback and field-repairability after a crash. Not for long-range endurance flyers—this shop focuses on high-impact racing and park sessions.

Curator's pick: TS101 Smart Soldering Iron

While everyone focuses on the drones, this iron is the actual MVP of a session because it runs off the same 6S packs you're already carrying, allowing for gate-side wire repairs that would otherwise end your day.

⚠ Worth knowing: The DJI Goggles 2 offer proprietary low-latency video, but they lock you into the O3 ecosystem, meaning you cannot easily bind to legacy analog setups without expensive, bulky adapters.

Carbon Fiber Airframe Selection GuideELRS Receiver and Wing AntennasAdvanced LiPo Charging Stations and Safety Bags

This FPV Racing Gear bundle is designed for pilots who embrace the thrill of FPV drone racing, including the inevitable crashes. It brings together essential equipment for immersive flight control, high-quality video capture, and immediate field repairs, ensuring you stay in the air and capture every moment.

This collection is for the FPV enthusiast who demands reliable gear for racing and freestyle flying, and isn't afraid to get their hands dirty with repairs. It's perfect for pilots who want to document their flights, share their experiences, and minimize downtime after an unplanned landing.

Starting with a solid controller and FPV goggles provides a strong foundation for flight. A full build, including a camera and repair tools, can range from $1000 to $1785, while a starter setup can be had for $590 to $850.

Full build

$1000–$1785

Starter

$590–$850

Goggles + Transmitter + Propellers

Best forFPV RacingFreestyle FlyingField RepairsContent CreationImmersive Flight
DJI Goggles 2

DJI Goggles 2

98%

DJI

ASIN:
B0B21H1V77
FPV Goggles$400-$600

The DJI Goggles 2 are a high-end digital FPV headset designed for immersive flight experiences. They are suitable for FPV pilots seeking clear, low-latency video feeds from their drones. This product enhances situational awareness and control during flight, crucial for racing and freestyle.

  • Digital video transmission
  • High-definition display
  • Adjustable diopters
  • Lightweight design
  • Dual-band Wi-Fi support

In this shop: These goggles represent the cutting-edge of immersive flight, fitting the FPV Drone Racing Gear vibe by providing a critical interface between pilot and drone during high-speed action.

Shop on eBay Shop on Amazon
View details →
Ethix S3 Watermelon Propellers

Ethix S3 Watermelon Propellers

95%

Ethix

ASIN:
B0BX9RTDXS
Drone Parts$5-$10

Ethix S3 Watermelon Propellers are a popular choice for 5-inch FPV racing drones. These durable propellers are designed for pilots who need reliable thrust and responsiveness. They are frequently replaced due to common impacts during FPV racing and freestyle flying.

  • Set of 4 propellers
  • 5-inch diameter
  • Durable polycarbonate material
  • Standard M5 mounting
  • Optimized for 2306-2507 motors

In this shop: These propellers align perfectly with the 'Crash Crash Crash' aspect of the FPV Drone Racing Gear vibe, being a commonly replaced part after inevitable impacts.

Shop on eBay Shop on Amazon
View details →
TS101 Smart Soldering Iron

TS101 Smart Soldering Iron

92%

MINIWARE

ASIN:
B01MDTO6X7
Tools$60-$80

The TS101 Smart Soldering Iron is a compact and portable tool essential for FPV drone pilots. It is designed for quick field repairs, allowing pilots to fix connections or replace components on the go. This soldering iron helps minimize downtime after crashes.

  • Portable, pen-style design
  • Fast heat-up time
  • Adjustable temperature control
  • USB-C power input
  • Digital display

In this shop: This soldering iron is crucial for maintaining the FPV Drone Racing Gear vibe, enabling on-the-spot repairs that keep pilots flying despite crashes.

Shop on eBay Shop on Amazon
View details →
RadioMaster TX16S MKII Radio Transmitter

RadioMaster TX16S MKII Radio Transmitter

97%

RadioMaster

ASIN:
B0DXTDNGY8
Controllers$190-$250

The RadioMaster TX16S MKII Radio Transmitter is a versatile and widely used controller for FPV drone pilots. It offers precise control over drones, making it suitable for both beginners and experienced racers. This transmitter is a core component for commanding your FPV aircraft.

  • Multi-protocol RF module
  • Full-size HALL sensor gimbals
  • OpenTX/EdgeTX compatible
  • Touch panel display
  • External module bay

In this shop: This transmitter embodies the control aspect of the FPV Drone Racing Gear vibe by being the pilot's primary interface for precise drone manipulation.

Shop on eBay Shop on Amazon
View details →
Tattu R-Line 6S 1300mAh LiPo Battery

Tattu R-Line 6S 1300mAh LiPo Battery

95%

Tattu

ASIN:
B0FCS9NJ1K
Batteries$30-$45

The Tattu R-Line 6S 1300mAh LiPo Battery is a high-performance power source for FPV racing drones. It provides the necessary voltage and capacity for aggressive flight maneuvers and extended flight times. This battery is designed for pilots who demand consistent power delivery.

  • 6S (22.2V) nominal voltage
  • 1300mAh capacity
  • High discharge rate (C-rating)
  • XT60 connector
  • Designed for 5-inch FPV drones

In this shop: This battery is fundamental to the FPV Drone Racing Gear vibe, providing the raw power needed for high-speed racing and aggressive freestyle flying before a crash.

Shop on eBay Shop on Amazon
View details →
GoPro Hero 12 Black Bone Edition

GoPro Hero 12 Black Bone Edition

94%

GoPro

ASIN:
B0DD5G9QGJ
Action Cameras$300-$400

The GoPro Hero 12 Black Bone Edition is a lightweight action camera optimized for FPV drone footage. It is ideal for pilots wanting to capture high-quality video of their flights and crashes. This camera allows for sharing dynamic FPV content.

  • Optimized for FPV (lighter weight)
  • High-resolution video recording
  • Wide field of view
  • Stabilization technology
  • Remote control capability

In this shop: This camera perfectly suits the FPV Drone Racing Gear vibe, allowing pilots to document the thrilling, and sometimes wreck-filled, experiences of their FPV journey.

Shop on eBay Shop on Amazon
View details →

What works

  • This kit allows for seamless integration of high-definition video capture with precise drone control, enhancing both performance and content creation.
  • The combination of a portable soldering iron and readily available propellers minimizes downtime, letting pilots quickly get back in the air after crashes.
  • High-performance batteries and advanced goggles provide extended, immersive flight sessions, crucial for competitive racing and practice.

What to know

  • The total investment for all items in this bundle can be significant, potentially making it a high barrier to entry for new FPV hobbyists.
  • Mastering all the components, especially the sophisticated radio transmitter and advanced FPV goggles, requires a dedicated learning curve.

How to use this together

  1. 1

    Set Up Your Control System First

    Begin by configuring the RadioMaster TX16S MKII Radio Transmitter with your FPV drone, ensuring all channels are mapped correctly. This step is crucial for establishing reliable communication and control, as it forms the foundation for all subsequent flight operations.

  2. 2

    Calibrate Your FPV Goggles

    Next, connect and calibrate your DJI Goggles 2 to your drone's video transmitter. Adjust the interpupillary distance and focus until the image is clear and comfortable, as this directly affects your situational awareness and immersion during flight.

  3. 3

    Capture Your Flights

    Mount the GoPro Hero 12 Black Bone Edition securely to your FPV drone. Ensure it's powered on and recording before takeoff to capture all your thrilling flights and unexpected crash footage from a unique perspective.

  4. 4

    Power Up for Performance

    Before each flight, ensure your Tattu R-Line 6S 1300mAh LiPo Battery is fully charged and securely mounted. A properly charged battery guarantees optimal performance and flight times, critical for extended racing or freestyle sessions.

  5. 5

    Be Ready for Repairs

    Keep the TS101 Smart Soldering Iron and spare Ethix S3 Watermelon Propellers readily accessible. After inevitable crashes, these tools will be essential for quick field repairs, allowing you to reattach wires or replace damaged props and return to flying with minimal delay.

Frequently asked questions