This selection of products provides all the necessary components for building and implementing a homemade pig feeder. It's designed for small-scale farmers and homesteaders looking to efficiently manage pig feeding and watering. The bundle helps create a practical and cost-effective feeding solution for swine.
This shop is built from the ground up to help you construct an efficient, homemade pig feeder suitable for small-scale farming and homesteading. It's designed to provide a cost-effective alternative to pre-built feeding systems, empowering you to manage your swine's nutrition with readily available components.
This bundle is perfect for the hands-on homesteader, small farm owner, or anyone looking to ensure their pigs have a consistent supply of feed and water. It's ideal for maintaining feed quality, reducing waste, and preventing contamination in your pig enclosures.
To get started with a basic gravity feeder, focus on the PVC components and a storage bin. A full build, including tools and a trough, could range from $185 to $435, offering a complete and durable solution.
Full build
$185–$435
Starter
$50–$125
Gravity feeder only
Best forSmall-Scale FarmingHomesteadingDIY EnthusiastsPork ProductionLivestock Management
These PVC pipes and elbow fittings are used to construct the dispensing mechanism of a gravity-fed pig feeder. They are suitable for DIY enthusiasts and farmers creating custom feeding systems. The components allow for controlled flow of feed from a hopper to the feeding trough.
Schedule 40 PVC construction
Standard pipe and elbow assortment
Resistant to weather and feed acids
Easy to cut and join
Variety of diameters (2-4 inches)
In this shop: PVC Pipe and Elbow Fittings fit the DIY farm utility vibe by providing foundational materials for building custom agricultural solutions.
This heavy-duty plastic storage bin serves as the primary reservoir for pig feed in a homemade feeder. It is ideal for farmers and homesteaders seeking a durable and rot-resistant container. The bin helps protect feed from weather elements and pests while providing a large capacity.
Food-grade plastic construction
Secure, latching lid
Capacity of 20-50 gallons
Weather-resistant material
Stackable design with reinforced base
In this shop: The Heavy Duty Plastic Storage Bin supports the DIY farm utility and livestock management vibe by offering a practical and robust feed storage solution.
The automatic swine drinking nipple provides on-demand water access for pigs, typically installed alongside feeders. It is designed for livestock owners wanting to ensure a constant and clean water supply. This nipple helps prevent water waste and contamination, supporting animal health.
Stainless steel construction
Spring-loaded mechanism
Threaded for pipe connection
Drip-free design
Suitable for all pig sizes
In this shop: The Automatic Swine Drinking Nipple aligns with the livestock management vibe by offering an efficient and hygienic hydration solution for pigs.
These bulk pig feed pellets provide a complete and balanced diet for swine, dispensed through homemade feeders. They are intended for pig farmers and homesteaders requiring a convenient and nutritious food source. The pellets ensure pigs receive essential nutrients for growth and health.
High protein content (16-18%)
Fortified with vitamins and minerals
Pelletized for reduced waste
Available in 50lb bags
Suitable for growing and finishing pigs
In this shop: Bulk Pig Feed Pellets are central to the livestock management vibe, representing the primary consumable for effective pig nutrition.
This cordless drill and hole saw kit is essential for precisely cutting openings in plastic bins and PVC pipes during feeder construction. It is suitable for DIY builders and farmers needing versatile and portable drilling capabilities. The tools facilitate accurate assembly of components for a functional feeder.
18V or 20V cordless drill
Assorted hole saw sizes (1-4 inches)
High-torque motor
Rechargeable battery and charger included
Durable carrying case
In this shop: The Cordless Drill and Hole Saw Kit reinforces the DIY farm utility vibe by providing the necessary tools for custom fabrication.
A galvanized steel trough offers a durable and hygienic feeding or watering station for pigs, either as a base for a feeder or a standalone unit. It is intended for farmers seeking long-lasting and easy-to-clean equipment. The trough resists rust and can withstand rough use by livestock.
Heavy-gauge galvanized steel
Rust-resistant finish
Smooth, seamless interior
Capacity of 5-15 gallons
Reinforced rolled edges
In this shop: The Galvanized Steel Trough complements the farm utility and livestock management vibe by providing a robust and practical feeding component.
These heavy-duty ratchet straps are used to securely fasten homemade pig feeders to fence posts or other stable structures. They are for farmers and homesteaders needing reliable tie-down solutions for outdoor equipment. The straps prevent feeders from being knocked over or moved by animals.
Industrial-grade polyester webbing
Rated for 1,000+ lb working load
Corrosion-resistant metal hardware
1-2 inch strap width
Length of 10-20 feet
In this shop: Heavy Duty Ratchet Straps align with the DIY farm utility vibe by ensuring the stability and security of custom-built farm equipment.
Building your own feeder allows for customization to fit your specific pen size and pig numbers, optimizing feed delivery and reducing waste.
This setup effectively protects feed from weather, pests, and contamination, ensuring a healthier and more consistent diet for your pigs.
The combination of a gravity feeder and an automatic drinking nipple provides continuous access to both food and water, promoting animal welfare with minimal daily effort.
What to know
The initial construction requires some DIY skills and time, which might be a barrier for those preferring an out-of-the-box solution.
While cost-effective in the long run, the upfront investment in tools like a drill and hole saw can add to the initial expense if you don't already own them.
How to use this together
1
Prepare the Feed Hopper
Begin by using the Cordless Drill and Hole Saw Kit to create a precise opening in the bottom of the Heavy Duty Plastic Storage Bin. This opening needs to be sized appropriately for the PVC Pipe and Elbow Fittings, allowing for a good seal as this will be your main feed reservoir.
2
Assemble the Dispensing Mechanism
Connect the PVC Pipe and Elbow Fittings to the opening you created in the storage bin, forming a gravity-fed funnel. Ensure all connections are secure to prevent feed leakage. Some designs may require multiple elbows to direct feed into a trough.
3
Set Up Water and Trough
Position the Automatic Swine Drinking Nipple near the feeder, ensuring it's at an appropriate height for your pigs. Place the Galvanized Steel Trough beneath the PVC dispending mechanism to catch the Bulk Pig Feed Pellets. This ensures pigs have easy access to both food and fresh water.
4
Secure the Feeder
Use the Heavy Duty Ratchet Straps to firmly attach the entire feeder assembly to a fence post or other stable structure. This prevents pigs from knocking over or moving the feeder, maintaining its position and reducing mess.
