This drone parts bundle is for serious FPV freestyle pilots looking to build or upgrade a high-performance cinematic drone. It includes core components like a durable frame, advanced flight electronics, smooth motors, and optimized propellers. These parts collectively enable precise control and clear footage capture for advanced freestyle flying.
Curated by The Dressing Room · Updated June 2026
Built for experienced freestyle pilots who prioritize airframe rigidity and predictable weight distribution over shaving grams. Not for casual racers — this shop focuses on heavy-duty resonance control and component survivability during high-impact technical flight.
Curator's pick: ApexDC DeadCat FPV Frame
The geometry here resolves the standard resonance issues found in cheaper carbon; the interlocking arm design provides a structural stiffness that keeps the PID loop clean without excessive software filtering. It is the most stable foundation for a mid-weight build I have handled.
⚠ Worth knowing: The DeadCat geometry means your rear motors will likely run hotter than the front due to air turbulence—you must be comfortable tuning individual motor output to balance the thermal load.
High-Discharge LiPo Power SystemsAnalog vs Digital Long-Range AntennasAction Camera ND Filter Kits
This ShopaPost bundle is built around the core components needed to construct or significantly upgrade a high-performance cinematic FPV freestyle drone. It emphasizes durability, precise control, and high-quality video capture, stemming from reputable FPV components known for their reliability and performance.
This bundle is for serious FPV freestyle pilots, particularly those focused on cinematic flying. It's ideal for experienced builders looking to achieve buttery-smooth footage and execute complex aerial maneuvers with confidence.
Building an FPV drone can be an investment. Start with the ApexDC frame, F722 Stack, and Blackbird V2 Motors for essential flight capabilities at around $215-$290. A full build, including advanced camera and control, will range from $1130-$1390.
Full build
$1130–$1390
Starter
$215–$290
Frame, FC/ESC, and motors only
Best forFPV Freestyle PilotsCinematic Drone BuildsAdvanced Aerial ManeuversHigh-Quality Video CaptureReliable ControlDurable Drone Components
The ApexDC DeadCat FPV Frame is a durable carbon fiber frame designed for freestyle cinematography. Its dead cat configuration keeps propellers out of the camera's view, ensuring clear, unobstructed footage. This frame is suitable for pilots who prioritize stable flight and high-quality video capture.
Carbon fiber construction
Dead Cat frame geometry
Aims for clear cinematic footage
Designed for freestyle use
Accommodates various FPV components
In this shop: This frame embodies the custom FPV freestyle drone parts vibe by offering a specialized design for cinematic performance.
This F722 Stack includes a high-performance Flight Controller and Electronic Speed Controller (ESC). It provides precise control and efficient power distribution for advanced FPV freestyle drones. This stack is for experienced pilots seeking reliable and responsive flight characteristics.
F722 processor
Integrated Flight Controller and ESC
High current rating
Firmware compatibility (e.g., Betaflight)
Designed for 5-6 inch freestyle drones
In this shop: The F722 Stack aligns with the custom FPV freestyle drone parts vibe by offering professional-grade electronics essential for advanced flight dynamics.
Blackbird V2 FPV Motors are designed for smooth throttle response and efficient performance in freestyle applications. These motors provide the power and control necessary for intricate aerial maneuvers. They are suitable for pilots who demand precision and reliability from their drone's propulsion system.
Brushless motor technology
Optimized for 5-6 inch props
Specific KV rating (e.g., 1800KV)
Durable bell design
Smooth throttle linearity
In this shop: These Blackbird V2 FPV Motors fit the custom FPV freestyle drone parts vibe by focusing on the smooth, controllable power needed for freestyle flying.
S5 Cinematic FPV Propellers are engineered for smooth freestyle flight and durability. Their design contributes to stable flight characteristics and minimizes vibrations for cinematic filming. These propellers are suitable for pilots looking for a balance of performance, efficiency, and robustness.
5-inch diameter
Specific pitch (e.g., 4.5 inch)
Balanced and durable plastic compound
Low vibration profile
Standard mounting (e.g., 5mm shaft)
In this shop: The S5 Cinematic FPV Propellers enhance the custom FPV freestyle drone parts vibe by providing the critical interface for stable and smooth flight.
The HERO12 Black Action Camera is used for capturing high-quality cinematic footage during FPV freestyle flights. It records video with stabilization and detail, designed to withstand the demands of dynamic aerial action. This camera is for pilots who want to record their flights in professional quality.
5.3K60 video resolution
HyperSmooth stabilization
Waterproof rugged design
Wide field of view
Live stream capability
In this shop: This HERO12 Black Action Camera is central to the custom FPV freestyle drone parts vibe, as it is the primary tool for documenting high-skill flight.
FPV Goggles V2 provide a high-resolution digital video feed for the pilot, offering an immersive and clear view during flight. These goggles use a digital transmission system for low-latency, high-quality visuals. They are essential for pilots who require a precise and reliable live feed of their drone's perspective.
Digital video transmission
Dual display screens
High resolution (e.g., 810p)
Low latency operation
Supports DVR recording
In this shop: The FPV Goggles V2 complement the custom FPV freestyle drone parts vibe by providing the critical visual link between pilot and drone.
The Tango 2 Pro Radio Controller is a compact and highly reliable remote control preferred by freestyle pilots. It offers precise stick feel and robust signal transmission for confident drone control. This controller is for pilots seeking a portable yet powerful solution for FPV flying.
Crossfire internal module
Hall effect gimbals
Compact form factor
Integrated OLED screen
Long-range capability
In this shop: This Tango 2 Pro Radio Controller reinforces the custom FPV freestyle drone parts vibe with its focus on precise and reliable control for demanding flight.
The combination of the ApexDC frame and S5 Cinematic Propellers ensures stable flight and unobstructed, smooth footage ideal for cinematic applications.
High-performance F722 Stack and Blackbird V2 Motors provide precise control and responsive power delivery for demanding freestyle maneuvers.
The integrated HERO12 Black and FPV Goggles V2 setup delivers clear, immersive views and professional-grade video recording capabilities for a complete cinematic experience.
What to know
The total cost for the complete setup, especially with the high-end camera and goggles, represents a significant investment for a hobbyist.
Assembling and tuning these advanced components requires prior FPV building experience and technical knowledge to achieve optimal performance.
How to use this together
1
Assemble the Frame and Motors
Begin by installing the Blackbird V2 FPV Motors onto the ApexDC DeadCat FPV Frame. Ensure all screws are tight and motor wires are routed cleanly. This provides the foundational structure and propulsion system, crucial for stable flight.
2
Integrate Flight Electronics
Next, carefully mount the F722 Stack Flight Controller and ESC onto the ApexDC frame. Solder the motor wires to the ESC, following the correct rotation. This step establishes the 'brain' of your drone, enabling communication and control between components.
3
Add Propellers and Camera
Attach the S5 Cinematic FPV Propellers to the motors, checking for correct orientation. Then, securely mount the HERO12 Black Action Camera to the designated area on the frame. The propellers are essential for lift, and the camera placement dictates your cinematic perspective.
4
Configure Radio and Goggles
Bind your Tango 2 Pro Radio Controller to the flight controller and connect your FPV Goggles V2. Ensure all settings are calibrated, and you have a clear video feed. This final step establishes your control link and immersive visual experience for flying.
